СВАРОЧНЫЙ АППАРАТ ПЛАСТМАССЫ WEP 872D HOTAIR ГРОТ + СОПЛА

В наличии
Артикул
12355423946
6 069,00 грн.
Добавить в список желаний
Welder for plastic WEP 872D + tip for service + guide
  • Multi harvester - plastic welding and soldering - for the car repair shop
  • Very strong and durable heater < /B> - wire on the core
  • Real temperature reading from hot air and from the tip of the tip !!!! эти другие сварочные машины не имеют, e.G. 852D+, 850AD, 850BD...
  • Built-in Tip soldering iron for servicing
  • Cooling down and turning off The Hotair after work !!!
  • Standard stock size-all nozzles fit
  • What are you buying:

  • WEP 872D welder
  • Hotair stock holder
  • a support for putting away the tip of the butt with a sponge for cleaning the tip
  • Grotto stock
  • Power cable
  • hotair nozzles:

  • Nozzle with a diameter of 4.4 mm модель 1130 < /B >
  • 8 мм модель1195 < /B> nozzle
  • Nozzle with a diameter of 9 mm модель 1197
  • Plastic Welding Tutorial

    WEP 872D HOTAIR ПЛАСТИКОВЫЙ СВАРОЧНЫЙ АППАРАТ + НАСАДКИ
    The WEP 872d welder is characterized by:
  • Power demand: 700W
  • источник питания: 230 В
  • Blow Type: Spiral Blow Diaphragm Pump
  • Compressor capacity max 24l / min
  • диапазон контроля температуры:
  • Smooth regulation of hot air temperature in the range of 100-480 ° C
  • temperature stability: 1 ° C
  • Smooth regulation of the temperature of the tip flask in the range of 100-480 ° C
  • Tip temperature stability: 2 ° C
  • Blow-in adjustment: YES
  • Hot air temperature LED display
  • Tip temperature LED display
  • Длина ручки: 100 см
  • Tip resistance to ground: less than 2 ohms
  • Tip potential to ground: less than 2mV
  • Сварочный аппарат WEP 872D HOTAIR + сопло Weight (with packaging) 6 кг

    The WEP 872d welder is a hot air 2-in-1 device for welding plastics and a tip welder for desoldering and soldering electronic circuits

    WEP 872D < /b > is a welder with the best features of the 852 series station, equipped with the latest PID temperature control processor. Станция показывает температуру горячего воздуха, припаивающего Железо и температуру припаивающего железа. спасибо ПИД-контроллеру, мы получаем сварку с высокой стабильностью температуры и быстрым ответом на ее изменение.

    WEP 872D displays temperatures in degrees C or F.

    The welding machine is controlled by one microprocessor, thanks to which we obtain high stability of work and high safety when soldering.

    Hot air welder and soldering iron can work independently of each other.

    The WEP 872d welder additionally equipped with an automatic cooling system, i.e. after finishing work, the hot air heater is cooled down to a safe temperature, which effectively extends the life of the heating elementure. Welder has a solid metal housing. Воздух выдувается компрессором, спасибо, что мы можем быть уверены в долгосрочной, отказоустойчивой работе со стабильностью выдувных сил.

    NOZZLES:

    Along with the welding machine you get a set of nozzles, so you can start work immediately

    Calculation of the profitability of welding

    Typically, the price of the service is calculated based on the type of crack:

  • Crack difficult up до PLN 2 / 10mm
  • medium crack, up - 1.5 PLN/10mm
  • crack easy upдо PLN 1/10 мм
  • другие случаи ремонта пластиковых элементов в соответствии с индивидуальными компонентами
  • for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.

    Compare the 872d with the 852d +

    смотреть на

    https://www.youtube.com/watch?v=AzAu5csiI34

    WEP 872D HOTAIR пластиковый сварочный аппарат наконечник + сопла модель SET277

    Heating spiral made of thick wire wrapped on a ceramic or mica frame.

  • Red-blue wires and temperature Sensor connection
  • Red wires connecting the heater
  • WEP 872D HOTAIR пластиковый сварочный аппарат наконечник + сопла максимальная рабочая температура 480°C

    Connecting the heating элемент

  • Blue andred wires for the temperature sensor
  • Wire, Wire connecting the heater
  • WEP 872D HOTAIR пластиковый сварочный аппарат наконечник + сопла Минимальная рабочая температура 100°C

    The welding machine comes with a guide for welding plastic.

    это вводит вас в вопросы сварки пластика в легкий путь и делает его легче начать работу с устройством.

    WEP 872D HOTAIR пластиковый сварочный аппарат наконечник + сопла Brand Hotair
    WEP 872D HOTAIR пластиковый сварочный аппарат наконечник + тип сопла для горячего воздуха
    WEP 872D HOTAIR пластиковый сварочный аппарат наконечник + сопла код производителя HOTAIR SET277
    Translated by AiTranslate api services.

    Вернуться к Началу

    СВАРОЧНЫЙ АППАРАТ ПЛАСТМАССЫ WEP 872D HOTAIR ГРОТ + СОПЛА купить в Украине купить из Европы доставка - EuroZakup - Харьков, Одесса, Киев, Львов, Луцк, Днепр, Чернигов, Тернополь, Ужгород, Сумы, Запорожье, Херсон, Кривой-Рог, Николаев, Полтава.

    6 069,00 грн.