Контроллер температуры термостат контроллер датчик
the controller has a digital temperature reading and a display calibration function. The ON-OFF control method with adjustable hysteresis was used. The controller is equipped with a 20A High-power relay control output (максимальная нагрузка сопротивления 4500w / 20A / 230 ~). Operation mode: "heating " or " cooling " is set in the меню.
Installation in an electrical switchboard on a Th-35 DIN rail .
источник питания: < /B> стандарт is 230V ~ + / - 15%
it is possible order a version of the controller
зл 12vac/DCили 24VAC/DC(12V-12,30 зл , 24V-36,90 зл)универсальный контроллер предназначен для регулирования температуры в тепловых системах:
and охлаждение:
контроллер используется для поддержания температуры T with a sethysteresis T in cooling or heating devices. Привод контролируется реле выхода, а температура измеряется температурным датчиком. The operating principle of temperature control in heating (рис. 1) and cooling (рис. 2).
the originalESCO controller has an additional temperature Alarm function. In the controller parameters, you can set the Upper and lower alarm thresholds, if exceeded, an audible alarm will be activated.
Made of stainless steel in the IP67 tightness class (waterproof).
A 200 cm long cable, which, if necessary, can be extended with an electric cable (preferably a cord, two-core 1.5 мм) до 80 метров.
Entry:
Measuring range: -50 ... + 150 ° C
Resolution: 0.1 ° c over the entire range
Display: LED, 4 digits 11mm high with graphic icons
Control method: ON-OFF with adjustable hysteresis
выход управления: 20A / 4.5 kW, durability 100,000 cycles
Additional functions:
крепление: DIN Th-35 rail
источник питания: < /b > 230vac +/- 15% (стандарт) or 12vac / DC or 24ac / DC
- Temperature display
- Temperature Unit indicator
- Entering the configuration parameters меню
- Temperature setting button
- Value decrease button
- Value increasing button
- Temperature setting signaling
- Cooling output indication
- Heating output signaling
- Signaling the defrosting process
- Signaling of alarm states
the controller occupies The width of 3 (three) modules on the rail.