Корпус для Raspberry Pi модель 3/2 / B + DIN-рейка
Case for the Raspberry model 3/2 / B + microcomputer, adapted for Mount on a DIN rail, made of black and transparent acrylic with a thickness of 3mm.
Assembled on 4 metal spacers with which the hitch also attached.
the housing can be mounted vertically or horizontally.
Specification
Color: black, bottom and sides, transparent top
материал: 3 мм thick acrylic
the sale is only for the case, no minicomputer
Additionally, countersunk screws are used, which are flush with the housing, which makes it easy to secure (seal) the contents of the housing.
It has holes for all standard connectors: аудио / видео, USB, Ethernet, power and memory card.
Я-производитель, он требует, чтобы я мог свободно модифицировать дома, добавлять гравюры,дополнительные вентили и т.
The housings are covered with a protective foil to prevent scratching during transport. Это должно быть удалено до использования продукта. Защитные пленки могут быть голубыми, белыми или прозрачными. Если продукт выглядит иначе, чем на аукционе, это означает, что foils не удаляется. После удаления их, плексиглас будет обведен цветом в заказе. Foils очень хорошо относится к продукту, который заставляет его видеть, что plexiglass поцарапан или отличается цветом.
The foil should be torn at the edge или corner. Мы предлагаем вам использовать штырь или иглу для этой цели. Далее, The foil comes off the product nicely and without any problems.