СЧЕТЧИК ГЕЙГЕРА РАЗОБРАННЫЙ DIY

This is a set of high quality set of unassembled parts of nuclear radiation detecting module, plug it in and you can measure nuclear radiation directly. For the detection of 20mr / h-120mr / h gamma rays and 100-1800 off variables / soft beta points. Ты можешь попробовать.

Characteristics:

5V power supply or 3 * 1.5 V battery; 4 * 1.2 V battery, current: 30mA - 120ma.

For the detection of 20mr / h-120mr / h gamma rays and 100-1800 off variables / soft beta points .

Equipped with audible alarm and light alarm function .

Break the output interface, so that the interface can connected to the microcontroller, then displayed on the LCD.

поддерживает мост Гейгер трубы: M4011, STS-5, SBM20, J305 etc. (Can support the working voltage of 330-600V Geiger tube).

it supports computer (PC) Data acquisition, Matlab analysis and processing.

Nuclear radiation detection (copy the browser link below to watch):

Customers using our Geiger counter for video recording:

Compatible with:

(UNOR3 or any other arbitrary with 5V and external INT interrupt is recommended)

Internet download: s-PI example for Radiation Logger

Radiation logger can be used as a master computer software for building a radiation monitoring station.

технические данные:

материал:"электронный компонент"

Geiger Tube parameters:

технические параметры diameter: Φ10 ± 0.5 mm

общая длина: 90 ± 2 мм

Starting voltage: & lt; 350v

Recommended operating voltage: 380V

минимальная длина плато: 80V

the maximum slope of the plateau: 10% / 80V

Extreme working voltage: 550v

Max counting speed: 25 times / min

средняя температура: -40 до 55 ℃

упаковочный лист:

1 * Unassembled radiation detector module kit